Bristol: Electrics - 2 Bed Victorian Hse (move and create new) (ended)

Electrics - 2 Bed Victorian Hse (move and create new)

House has no furniture in and has been stripped back to bear walls so is empty and easy to move around in with nothing getting in the way. Ground Floor has concrete floor so electrics have been taken from the upstairs and there is trunking boxes coming through to ground floor. I want all electric trunking to be removed and electrics hacked into walls so all is flush to wall as follow. This is a long list so sounds like more work than it actually is but want you to have as much info as possible GROUND FLOOR LIVING ROOM: 1) Lower and move by 1 metre, 2 dbl sockets (this has already been hacked into wall there is no trunking) 2) Create new 2 dbl sockets in the middle of the chimney breast for TV (elec can be run from the above two dbl sockets as they are close by) 3) Create 1 new dbl socket to the left side of chimney breat (elec can be run from the above new socket) 4) Lower 1 dbl socket by 1 foot and hack all trunking into wall which comes down from ceiling 5) Hack into wall one light switch and trunking which comes down from ceiling) 6) Make redundant by removing 1 on off box which was used for power to storage heater. 7) Remove old dbl socket box which has just been cased over so is not in use. 8) Remove old light switch, This has been cased over so is not is use. GROUND FLOOR DINING ROOM 1) Lower x 2 dbl sockets by 20 inches and hack into wall. (elec come from celing down runs through trunking down the side of door way and across skirting board and up again by 20 inches. 2) Hack into wall 1 single light switch but first make into a dbl light switch for being able to turn light on in Living room as well. There is no trunking here. 3) Remove old light swicth which has been cased off and is not in use. 4) Make redundant by removing 1 on off box which was used for power to storage heater and make into one dbl socket 5) Lower by 20 inches and hack into wall 1 dbl socket. There is trunking comeing down from ceiling here. KITCHEN 1) There is no kitchen in here at present. There are 2 dbl scokets in here currently which need to be hacked into wall and only moved slightly there is trunking here. I want 3 new dbl sockets for this room. 2) I need power socket for oven which is elctric 3) Celing light needs to be centered 4) Hack into wall 1 light switch. There is trunking here. HALLWAY DOWNSTAIRS 1) Hack into wall 1 dbl light swicth used for lights downstairs and upstairs BATHROOM 1) Light switch is just loose at present as there is no render on this wall yet just needs tydying up ready for render and plaster 2) Remove elctric fan cables as I do not require a fan. LANDING 1) Ceiling light move by 1ft 2) Make redundant by removing 1 on off box which was used for power to storage heater. 3) 1 Dbl socket to be lowered by by 1 foot and hacked into wall and there is trunking. 4) Light switch to be hacked into wall 5) Old light switch which has been cased and is not in use to be removed. SMALL BEDROOM 1) Lower by 20 inches 2 Dbl sockets. There is no trunking showing in this room. MAIN BEDROOM 1) Lower by 9 inches 1 dbl socket and hack into wall. Elec is already coming from floorboard up. 2) Lower by 27 inches 2 dbl sockets. Elec already coming from floorboards 3) New dbl socket required by bay window 4) Remove old celing light pully switch 5) Move ceiling light by 4 inches I am quite sure I have covered everything. I have also wrote on the wall within the property what I want done with each light switch or socket and anything new that I want.
Archive for Electricians